Pay attention to waterproof before tiling

Personnel: Generally, 444 workers are required.

Order: First affix the wall tiles, then affix the floor tiles.

î—¥ î—¥ Time: A good bricklayer is to stick 5-6 squares a day, otherwise it is difficult to guarantee quality. Especially in places like window sills that require small diagonals, it takes a lot of time.

î—¥ î—¥ 1, paving color glazed bricks:

  treatment of the base layer → elastic line → tile immersion wet → paving cement mortar → installation of standard blocks → paving the floor tiles → jointing → cleaning → maintenance.

î—¥ î—¥ 2, paving ceramic mosaic tiles (mosaic) category:

  treatment of the base layer → elastic line, standard gluten → paving cement mortar → paving → photographing → sprinkling water, uncovering paper → jointing, filling, cleaning → maintenance.


Expert tips:


î—¥ Construction points for paving ceramic tiles


1. The concrete floor should be chiseled at the base layer, the depth of the chiseling is 5~10 mm, and the spacing of the chisel marks is about 30 mm. After that, the clean floating ash, mortar, oil stains, and the production of scattered water brush will be less on the ground.

2, before laying the line should play a good line, on the ground pops the baseline line at right angles to the doorway, the line should start from the door to ensure that the entrance is a whole brick, the non-whole brick is placed under the corner or furniture, the elastic line should Pop up the vertical and horizontal positioning control line.

3. Before laying ceramic floor tiles, the ceramic floor tiles should be soaked in the shade.

4. When paving, the cement mortar should be satisfactorily applied to the back of the ceramic floor tile. After the paving, the rubber mortar is used for knocking. At the same time, check the calibration with a level gauge and wipe the surface cement mortar.

5, after 2 to 3 hours of paving, use a hook grout or white cement to wipe the seam, cement, sand = 1:1 (volume ratio) cement mortar, the seam should be filled dense, smooth and smooth. Wipe the surface with cotton wool.

Metal Zipper

Anti Brass Jeans Zipper,Two Sides Zippers,Zipper Oem Factory,Metal Zipper Gold Teeth

Zipper Accessories Co., Ltd. , http://www.fjzipper.com