Glass door handle installation considerations

[China Glass Net] Generally speaking, the current glass doors are made of tempered glass, which is reliable in hardness, easy to clean, generous in style, transparent and transparent, and does not affect the light. Now many hotels, shopping malls, villas, etc. All use glass doors. There are two kinds of glass doors, one is transparent, one is impervious, and the transparent one is made of tempered glass, while the frosted glass is impervious or semi-transparent.

The installation procedure of the glass door handle firstly put the glass door flat, mark the place where the handle is to be installed in advance, and use the corresponding size of the diamond brick to wash the eye with water. At this time, pay attention to the protection to avoid the glass from rupturing. If it is not tempered glass, use a 10mm glass drill bit to measure the hole pitch of the handle [center to center, mark on the glass, watering and punching.

Then apply a little glass glue to the part of the handle that is inserted into the glass. When the handle is assembled, the root is tightly attached to the glass and then the fixing screw is pressed to ensure that the handle is not loose.

When installing the handle later, first from the outside, screw the long screw inside the handle, do not leave the screw of the handle outside, so that the handle can be removed from the outside. The handle connection part should not be too tight when inserted into the hole, and should be slightly loose; if the insertion is too loose, the flexible part can be wrapped in the insertion part.

Wool Yarn

Wool Yarn,Merino Wool Yarn,Wool Linen Blend Yarn,Wool Linen Yarn

Consinee Group Go., Ltd. , https://www.cashmereyarn.nl