How to make the lobular rosewood bracelets survive in the summer
After the summer, everything is luxuriant and the temperature is gradually rising. So what is the need to pay attention to the maintenance of the lobular rosewood beads?
Xiaobian gives you some tricks, the following five strokes of maintenance skills to make your beloved lobular rosewood bracelets safe summer!
One: moisture and moisture
As long as it is wood, it will swell and shrink and deform, which is caused by the change in the amount of water adsorbed in the cell wall.
Simply put, the moisture in the wood has a balance with the air. The moisture content of the wood outside air is lower than that of the wood, which causes partial cracking. If the air humidity is higher than the wood moisture content, the wood absorbs the outside air in the opposite direction. The moisture causes swelling and the tide causes atomization.
Therefore, in the autumn and winter seasons, maintenance is needed to prevent cracking; in the spring and summer seasons, especially during the rainy season, moisture is required. Once wet, the sandalwood beads absorb the moisture in the air and expand and atomize (the surface of the beads is foggy and not shiny). The disk is not lit, so the best way to do this is to seal it.
Two: waterproof
In the summer season, there is more rain. If you accidentally touch the rain, the beads worn on your hand should be put in the bag at this time to avoid rain. If you soak in the rain, it will destroy your long-term hard work. If you are unfortunate enough to encounter rain, you should dry it immediately and place it in a cool, ventilated place.
Three: sunscreen
In summer, the temperature is high. If it is outdoors for a long time, in order to avoid fading, it is best to take it off to avoid prolonged exposure.
Four: anti-air conditioning
In summer, the outdoor temperature is high, and there are many air conditioners in the room and in the car. It must not be placed under the air conditioner. In addition to atomization, there is a sudden hot and cold environment that is easy to cause cracking. Small beads are better, and the probability of big beads is larger. So to avoid cracking the beloved beads, try to keep the temperature constant, do not put it in the air conditioning port.
There are also some friends who are easy to sweat because of their hands, like to put beads in the air conditioner. The bead is to precipitate the woody rosewood, and the plate is used to spread the rosewood on the beads and oxidize it, thereby producing a patina shell, which loses the disk once the temperature is lowered.
Five: anti-sweat
In summer, the outdoor temperature is high, and the human body needs to regulate the body temperature by perspiration. The rosewood woods are not sweaty and contradictory, so it is recommended not to wear when sweating for a long time. In addition, for sweaty hands, it is recommended to take anti-sweat measures (such as wearing a layer of disposable medical plastic gloves), and then wearing cotton gloves and beads.
In summary, it is to let the lobular rosewood bead always in a low-temperature and dry environment, such lobular rosewood beads will be preserved, remember to be close to water, high temperature and other environments, more information, please pay attention to China Jewelry Merchants Network.
Check Pleated Skrit,Lady Plaid Skirt,School Pleated Skirt,Pleated Elastic Waist Band Skirt
Shaoxing Julong Trading Co.,Ltd. , https://www.julong-foeec.com